Home Parts Repair DIY Guide Shopping Cart Contact Us Free & $5.95 Flat-Rate Shipping 512-220-9700  
Search:   
 
  Blind & Shade Repair Parts - BlindSaver ATX » 1" Blind : How To Replace A Wand Tilter
Categories
  Account  + 
Your Cart

1" Blind : How To Replace A Wand Tilter


Parts Related To This Repair:
1" Blind Tilters

These instructions cover two types of Mini Blinds, as shown in the Style A (left column) and Style B (right column). Refer to the photographs that best fit your blind.

1. Remove headrail end stiffener from wand tilter end. Repair Wand Tilter Repair Wand Tilter
2. Remove C-clamp from in between drum and side of rod support. The clamp keeps tilt rod from moving from side to side. There are no C-clamps in Style B. Instead, remove tilter rod support ladder clamps from tilt rod. Replace Wand Tilter Replace Wand Tilter
3. Slide tilt rod from wand tilter. For Style B the tilt rod needs to be removed completely. Fix Wand Tilter Fix Wand Tilter
4. Spread headrail apart at wand tilter location and remove wand tilter. Style B is smaller and will not spread as easily. Grab wand tilter with pliers and twist to one side and then remove wand tilter from headrail. Repair Wand Tilter Repair Wand Tilter
5. The new wand tilt will have a lip on front and this will fit into opening. Style B will not have a lip in front. Position wand tilter in place and snap into back lip of headrail. Replace Wand Tilter Replace Wand Tilter
6. Before pushing rod tilt back into wand tilter, position tab at top otherwise tilter will not thoroughly rotate. Fix Wand Tilter DIY Fix Wand Tilter DIY
7. Replace C-clamp. Replace ladder clamps, making sure not to twist ladder. Repair Wand Tilt Repair Wand Tilt
8. Replace end stiffeners. Repair Wand Tilter Repair Wand Tilter

 Download 1" Blind : How To Replace A Wand Tilter

Get free Adobe Acrobat Reader to download and view PDF files.


Copyright © 2005-2017 BlindSaver ATX Site by WebSitesThatWork Design by 7dana.com