Cellular Shade : How To Re-String

Parts Related To This Repair:
String & Cord

1. Remove both end caps from bottom rail, one end cap from top rail.
2. Remove cord lock from top rail.
3. Slide bottom rail and top rail exposing cords inside shade.
4. To calculate the proper amount of string use the window height x 2 + shade width + 12 inches.
5. Remove old string. Place washers aside for use in next step. Then insert new string with threading needle and pull cords through.string
6. Tie off new cords at the bottom using washer from old cord to prevent cord from pulling through.
7. Slide bottom and top rail back on shade.
8. Thread string into cord lock and reinsert cord lock back into top rail.
9. Reinstall both end caps on bottom rail and the one end cap on the top rail.
10. Measure from the cord lock down and add 2 inches, install the cord condenser ball. You will have 2 to 4 cords coming out of the shade (depending on the size of the shade) that will tie off inside of the cord condenser ball. You will also need a 1.8 mm size cord that is used as the pull string. This will be a single string that will be used to pull the shade up and down. This string is usually half the length of the string. You're done!

 Download Cellular Shade : How To Re-String

Get free Adobe Acrobat Reader to download and view PDF files.